Ordering and factories

Blanks or custom cut-and-sew: which should a new brand start with?

By Splot · · 4 min read

Start with blanks if your design is the print, the colour and the label, and with cut-and-sew if it is the fit or the fabric: a blank needs no pattern and usually one sample, while through Splot a custom 250 gsm washed tee with a screen print is estimated at €20 to €26 a piece at 50.

On this page
  1. What is the difference between a blank and cut-and-sew?
  2. When does a blank make sense?
  3. When is cut-and-sew worth it?
  4. How do the two compare on a first run of tees?
  5. Can you start with blanks and move to custom later?

What is the difference between a blank and cut-and-sew?

A blank is a garment whose pattern, fabric and construction already exist. You choose from what is there and add your colour, artwork and labels. Cut-and-sew starts from your own measurements: a pattern is cut for your design, the fabric is chosen for it, and the garment is sewn from scratch.

BlankCustom cut-and-sew
Fit and measurementsOne of the existing cuts, for example boxy, regular or croppedYour own size chart
Fabric and weightThe fabrics offered for that blankAny fabric the factory can source, with its own minimum
ColourFrom the colour list, plus a washDyed to your colour
Print and embroiderySet positions and techniquesAnywhere, including across seams
LabelsNeck label, hem tab, hang tagAnything you specify
DevelopmentNone: the pattern existsPattern, sample, fitting

There is a middle route, often called a modified blank: an existing pattern with one or two changes, such as a longer body or a different rib. It keeps most of the blank's speed and gives the garment one detail nobody else has.

When does a blank make sense?

When people buy the graphic, the colour or the name. A print brand, a band, a club or a first drop to test whether anyone buys at all is well served by a good blank, because the money goes into the design and the stock rather than into pattern rounds.

A blank also removes one reason a first sample fails: a new pattern that does not fit. The fit of a blank is known before you pay for anything, and the sample you order is the garment you will sell, in your colour and with your artwork.

When you compare blank suppliers, ask for the price per piece at your quantity with the decoration included, the minimum per colour, and what the sample costs. A garment price without the print leaves out a large part of what each piece will cost.

When is cut-and-sew worth it?

When the fit or the fabric is the reason someone buys. A boxy tee that is 62 cm across and 65 cm long, a 450 gsm hoodie that stands on its own, a shirt with a placket you designed: none of these exists as a blank, and a customer who has tried one on will tell the difference from a blank with your print on it.

Three signs point to cut-and-sew:

  • You describe the garment by its shape. If your brief starts with the drop of the shoulder or the length of the body, see what makes a T-shirt boxy. That is a pattern decision.
  • You need a fabric a blank does not come in: a particular weight, a heavier rib, a brushed or unbrushed back, a specific fibre. The fabric weight bands show what each weight is used for.
  • Other brands wear the same blank. A widely sold blank is recognisable by its cut, its neck rib and its seams. If your price depends on the garment being yours, it has to be.

Through Splot, custom production starts at 25 pieces per style, 50 for knitwear. The published estimate for a 250 gsm washed T-shirt with a screen print is €20 to €26 a piece at 50 and €19 to €25 at 100. A hoodie is €31 to €39 at 100, with the fabric and decoration confirmed in the quote. The pricing page has the full table.

How do the two compare on a first run of tees?

The custom figures below are Splot's published ones. Blank prices depend on the supplier, the garment and the decoration, so the blank column shows what to ask for. What the table does show is where the work sits before the first piece is made.

first run of teesBlankCustom cut-and-sew
GarmentsThe supplier's price at your quantity€20 to €26 a piece at 50, washed, screen printed
DecorationUsually priced by technique and quantityIn the estimate above
SampleYour colour and artwork on an existing garmentQuoted for the project, paid in full
PatternExistsMade for you, refined at the sample
Sample rounds to expectUsually one, to check colour and artworkOne or more, to check fit
PaymentOn the supplier's terms60% before production, 40% before dispatch

For a custom garment, Splot's terms give three to six weeks to a sample and six to ten weeks of production, depending on the product and the material. The time a blank saves is the second and third fitting round, which is where a custom first run tends to slip.

Can you start with blanks and move to custom later?

Yes, and it is often the cheaper order of things. Sell the blank, find out which colour and size sell, and only then pay for a pattern for the product that has proven it sells.

Fashion operations research supports holding the expensive commitment until sales come in. Fisher and Raman studied a skiwear company that committed part of its production only after the first sales were in. Against the firm's informal system, the optimised version cut the cost of demand uncertainty by enough to raise profits by 60%. A brand that tests with blanks is making the same move at a smaller scale: it learns from real orders before it pays for development.

The usual sequence:

  1. A blank in two or three colours, in the smallest quantity the supplier allows, to test the design and the price.
  2. A modified blank for the bestseller: the same garment with one change customers asked for.
  3. Cut-and-sew for the garment that has sold through twice, with its own size chart. What to send for an accurate clothing quote lists what that quote needs.

Short answers

Is a brand built on blanks a real clothing brand?

Yes. The customer pays for the design and the name, and a blank carries both. What a blank cannot give you is a fit or a fabric that belongs only to you.

Can I put my own label in a blank?

Usually. Ask the supplier which labels it can add, for example a printed or woven neck label, a hem tab or a hang tag. In a custom garment the labels are part of your specification.

What is the minimum for cut-and-sew?

Through Splot, 25 pieces per style and 50 for knitwear. Fabric can have its own minimum per colour, which minimum clothing orders: sizes, colours and fabric explains.

Does a blank sample cost less than a custom one?

It usually does, because there is no pattern to make and no fit to correct. A custom sample is quoted for each project, because the pattern work and the fabric differ from garment to garment.

Sources

  • Fisher, M. and Raman, A. (1996). Reducing the cost of demand uncertainty through accurate response to early sales. Operations Research, 44(1), 87-99. doi.org/10.1287/opre.44.1.87
  • Splot prices, minimums and terms as published on /pricing, November 2026.

Keep reading

Ask us about yours.

Tell us what you want made and we will tell you what it takes before you commit to anything. The quote is free.