Cost and quantity

Why the fabric minimum is bigger than the factory's MOQ

· 4 min read

A factory's 100-unit minimum covers cutting and sewing, but the mill's dye lot minimum is usually three to five times larger, so 100 units in one colour can commit you to fabric for 300.

On this page
  1. Why can a 100-piece minimum commit you to fabric for 300?
  2. What is a dye lot minimum?
  3. Where does the cost of the extra fabric go?
  4. Why do printed fabrics have a higher minimum?
  5. Does the fabric minimum change between mills and fibres?
  6. What should you ask before signing a quote at 100 units?

Why can a 100-piece minimum commit you to fabric for 300?

Because the factory's minimum and the fabric's minimum are two different numbers. The figure on your quote is what the factory can cut and sew at that price. Before it cuts anything, the mill has to dye or print the fabric, and the mill has a minimum of its own, which is usually the bigger one.

The factory's number is real. It just does not start the job. A quote at 100 units can be entirely honest about sewing and still leave the fabric question open, and that question is where the extra cost tends to sit.

This guide covers the fabric side. How a minimum is counted across sizes and colours at the sewing stage is set out in minimum order sizes and colours.

What is a dye lot minimum?

It is the smallest quantity of fabric a mill will dye in one colour in one batch. A mill will not run a partial batch for a single colour, so its real minimum is per dye lot, and that lot is usually three to five times the factory's own minimum.

A dye lot is fabric coloured together, in one run. Fabric from the same lot matches; fabric from different lots can differ slightly in shade, which is why a production run in one colour is best cut from a single lot. That is good for consistency. It is also why the mill's minimum is set by what fills a batch, not by how many garments you want.

Where does the cost of the extra fabric go?

Usually into your unit price. You order 100 units in navy. The mill still dyes enough fabric for 300. The factory then has to account for fabric you are not using, and the common way to do that is to price the difference into your unit cost.

fabric for this many unitswhat sets it
Factory minimum on the quote100cutting and sewing at that price
Dye lot at three times300the mill's batch
Dye lot at five times500the mill's batch

So the question is not only what the minimum is, but what happens to the balance. The surplus might be folded into your unit price, invoiced to you as fabric, held for a later order, or covered some other way. Each arrangement has a different cost, and the quote should say which one applies and who owns the fabric that is left.

Why do printed fabrics have a higher minimum?

Because printing adds a second minimum on top of the dye lot: the print repeat. A rotary screen is engraved for one design, and the mill spreads the cost of that engraving over a minimum run.

That is why a printed style at 100 units can be quoted as though it were 400, while the same body in a solid colour is suddenly affordable. The garment has not changed. The fabric has gone from a routine colour to a process with set-up cost for your design alone.

If a print is central to the style, ask for the fabric minimum on the printed version and on the same body in a solid, side by side. It is the clearest way to see what the print itself costs at a small quantity, and to decide whether it belongs in the first run or a later one.

Does the fabric minimum change between mills and fibres?

Yes. Three to five times is a typical range, not a constant. It moves with the fibre and with the mill.

A commodity cotton jersey at a large mill can hold a tighter dye lot than a wool blend at a small one. And a mill that is already running your shade can sometimes put your fabric into an existing batch, which can clear the minimum entirely.

That last case is worth asking about by name. "Is there a lot already booked in this shade?" is a different question from "Can you lower the minimum?", and it gets a different answer. The first asks the mill to add to a batch it is running anyway. The second asks it to run a smaller one, which is the thing it is set up not to do.

What should you ask before signing a quote at 100 units?

Ask for the dye lot minimum before you talk about price. The questions fit in one message:

  • What is the fabric minimum per colour for this material?
  • What happens to the balance if I only take 100 units?
  • Is there a lot already booked in this shade?
  • For a printed fabric, what is the minimum for the print, and what is it for the same body in a solid?

The answers tell you whether the unit price already carries surplus fabric, whether a different colour or material would remove the problem, and whether the 100-unit figure is really the number that governs your order. A factory that has to go back to its mill to answer is not a bad sign. A quote that cannot answer at all leaves the biggest number on the order unstated.

Before you sign a quote at the minimum

The factory's minimum tells you about sewing. The fabric minimum tells you about cost. On a small first run the second usually decides the price, so get it in writing alongside the quote, together with what happens to any fabric left over.

Where the dye lot is the obstacle, a colour the mill already stocks or is already running is often the cheaper route for a first order. The exact shade can wait until there is enough volume to fill a lot of its own. For how per-colour minimums add up across a whole first order, see what a first clothing production order really costs.

Keep reading

Ask us about yours.

Tell us what you want made and we will tell you what it takes before you commit to anything. The quote is free.