Is polyester safe to use for activewear?
· 4 min read
Polyester is a sound choice for activewear, but a polyester-spandex fabric should be covered by an OEKO-TEX Standard 100 certificate or a lab test before approval, because testing in 2022 found BPA at up to 22 times California's safety limit in polyester-spandex sports bras and shirts.
On this page
- Should an activewear brand avoid polyester?
- What did the 2022 testing of sports bras find?
- Which fabrics should a brand test first?
- What does an OEKO-TEX Standard 100 certificate cover?
- What if the mill cannot provide a certificate?
- Does polyester have a real downside for activewear?
- Should new activewear be washed before it is worn?
Should an activewear brand avoid polyester?
No. Polyester is a sound fibre for activewear, and the check that matters is on the finished fabric rather than on the fibre itself.
The reason most activewear is made from polyester is practical. The fibre barely absorbs water, so a top or a pair of leggings dries while the person wearing it is still training. Cotton holds on to the water it takes in, which is comfortable at rest and heavy during a session.
The concern that has attached itself to polyester is real, but it is aimed at the wrong thing. What reaches the skin is not a fibre. It is a fabric that has been knitted, dyed and finished, usually blended with spandex for stretch, and treated with whatever the mill uses to give it its handle, its colour and any performance finish. That finished fabric is what needs checking.
What did the 2022 testing of sports bras find?
In 2022, a US watchdog tested polyester-spandex sports bras and shirts from big brands and found BPA (bisphenol A) at up to 22 times California's safety limit. The finding concerned what was in those finished garments, not polyester as a fibre.
The detail that matters for a brand is where it was found. In that testing, BPA turned up only in polyester blended with spandex. That blend is what most leggings and sports bras are made of.
This guide does not go beyond that finding. It does not say what a safe level is or what exposure means for a wearer; those are questions for regulators and test labs. The practical conclusion is narrower and more useful: a big brand's name on the garment did not tell anyone what was in the fabric, and a small brand's fabric approval should not assume anything either.
Which fabrics should a brand test first?
Polyester-spandex first, because that is where the 2022 testing found BPA. In most activewear ranges that means leggings, sports bras and fitted tops, which are also the pieces that sit tightest against the skin.
This is a way of setting priorities, not a statement that other fabrics are clean. A range often uses several bases: a polyester-spandex for leggings, a plain polyester for a loose tee, a mesh for panels. Testing all of them may be sensible. If the budget or the schedule allows one check, it goes on the stretch fabric that sits on the body.
Ask the mill for the composition of each base in writing, including the spandex percentage, so you know which fabrics fall into the first group.
What does an OEKO-TEX Standard 100 certificate cover?
It certifies that specific textile articles have been tested for harmful substances against the limits for a product class. It covers named articles, not a mill in general, so the certificate has to name your fabric.
OEKO-TEX Standard 100 groups products into classes according to how they are used. Two matter most for activewear:
| Product class | Covers | When to ask for it |
|---|---|---|
| Class I | Articles for babies | If you make anything for babies |
| Class II | Articles worn against the skin | Leggings, sports bras, base layers, fitted tops |
A mill that holds a certificate for one fabric does not hold it for everything it sells. When a supplier sends a certificate, check three things: that it names the article you are buying, that the class is the one your product needs, and that it is in date. A certificate for the mill's cotton jersey says nothing about its polyester-spandex.
What if the mill cannot provide a certificate?
Then send the fabric to a lab before you approve it. A test on your own fabric, in your colour, is the alternative to a certificate, and in one respect it is more specific: it is the material you will actually make with.
Send fabric of the same quality and colour that will be used in bulk, not a header card or an older swatch. Tell the lab what the fabric is for (worn against the skin, for adults or for babies) so the testing matches the use. Make approval of the fabric conditional on the result, and keep the report with the style's records.
Timing matters. At sampling, a poor result costs a delay while you switch to another base. After the bulk fabric has been bought and cut, a poor result leaves far fewer options.
Does polyester have a real downside for activewear?
Yes: it holds smell. A polyester top can come out of the wash still smelling of the last session, which customers notice quickly.
Brands deal with it in two ways. Some add an anti-odour finish to the fabric. Others blend in merino, bringing a natural fibre into the mix. Both are fabric decisions, taken with the mill at development, rather than fixes after the first complaint.
If you choose an anti-odour finish, treat it as part of the same check. It is something applied to the fabric, so it belongs in what the certificate or the lab test covers.
Should new activewear be washed before it is worn?
Yes, and it is worth telling customers so. Washing new pieces before wearing them takes off a lot of the finishing chemicals left over from production.
This is not a substitute for testing the fabric. It is a sensible care instruction that costs nothing to print on a care card or a product page.
What to put in the fabric approval
For each base fabric in an activewear range:
- Composition in writing, including the spandex percentage, so polyester-spandex fabrics are identified first.
- An OEKO-TEX Standard 100 certificate that names the article, in Class II for anything worn against the skin and Class I for anything made for babies.
- Or a lab report on the bulk quality and colour, received before you approve the fabric.
- Every finish named, including any anti-odour finish, and covered by the same check.
- A care line advising customers to wash before first wear.
The physical checks on the bulk roll are a separate step, covered in four checks to run on fabric before you accept it. To have the fabric requirements written into the specification from the start, start with a free tech pack.