Fabric

Vegetable tanned or chrome tanned leather: what to specify

· 3 min read

Chrome tanning turns a hide into leather in about a day and accounts for roughly 80 to 90 percent of the world's leather, while vegetable tanning takes weeks and develops a patina, so a tech pack that says only premium leather is likely to get chrome.

On this page
  1. What is the difference between chrome tanned and vegetable tanned leather?
  2. What does genuine leather actually mean?
  3. What are full grain, top grain and split leather?
  4. Why does vegetable tanned leather develop a patina?
  5. What does a factory supply if the tech pack says premium leather?
  6. What is rub fastness, and why should it be quoted?

What is the difference between chrome tanned and vegetable tanned leather?

Chrome tanning uses chromium salts and turns a raw hide into leather in about a day. Vegetable tanning uses natural tannins from bark, wood and leaves, takes weeks, and leaves the surface open, so the leather develops a patina in a way chrome tanned leather does not.

Tanning is the process that turns a raw hide into leather; without it, skin rots. The two main methods produce materials that can look alike when new and behave differently afterwards.

Chrome tannedVegetable tanned
Tanning agentChromium saltsNatural tannins: bark, wood, leaves
TimeAbout a dayWeeks; around six as a working figure, sometimes more
Share of world leatherRoughly 80 to 90 percentA much smaller share
SurfaceSealedStays open
When newSoft, uniform, cheaperDenser
With useWearsDarkens and softens where it is handled

Speed is the commercial difference. A day against weeks goes a long way to explaining why chrome leather is the cheaper of the two, and why most of the world's leather is made that way.

What does genuine leather actually mean?

It means the material is leather, and says nothing about its quality. "Genuine leather" only tells you it came off an animal; in practice the term usually describes the split, the lower layer of the hide.

The phrase sounds like a mark of quality and works as one in a shop. On a specification it is close to empty. It does not say which layer of the hide was used, how it was tanned, or by whom. A tech pack that relies on it, or on "premium leather", leaves the decisions that matter to the factory.

What are full grain, top grain and split leather?

They are layers of the same hide. A thick hide is split horizontally: the top layer keeps the natural grain and is full grain, or top grain if the surface has been sanded to hide scars. Everything underneath is the split, with a grain pressed into it to imitate the real one.

LayerWhat it is
Full grainTop layer, natural grain left intact
Top grainTop layer, surface sanded to hide scars
SplitThe layer underneath, with an imitation grain pressed in

Layer and tannage are separate choices. A hide can be vegetable tanned and still be a split, so "vegetable tanned" on its own does not tell you that you are getting the top of the hide. Equally, "full grain" and "genuine leather" are not the same claim, and a supplier using one should not be read as offering the other.

Why does vegetable tanned leather develop a patina?

Because the surface stays open. Vegetable tanned leather darkens and softens where hands hold it, where it is folded and where it is carried, and that change is what people mean by patina.

Chrome tanning seals the surface, which is part of why chrome leather is soft and uniform from the first day. The same sealing means it does not age in that way: it wears rather than developing a patina. For a brand, the choice is between a material that stays much as it was until it wears and one that changes with its owner. Neither is wrong, but they are different products, and the product page should say which one the customer is buying.

What does a factory supply if the tech pack says premium leather?

Most likely the fast one. Without a named tannage, a factory has good reason to supply chrome tanned leather: it is cheaper, and nobody asked for anything else.

This is not bad faith. "Premium" is not a specification. The factory fills the blank with what it already has or can buy quickly, and for most of the world's leather that is chrome. If you want the feel and the ageing of vegetable tanned leather, the words have to be on the tech pack.

The same applies to the tannery. Without its name you are ordering a category, not a material, and the factory will fill the blank with whatever is already in its drum. Naming the tannery is also the first step to getting the same leather again on a reorder.

What is rub fastness, and why should it be quoted?

Rub fastness is a grade from 1 to 5, tested wet and dry over a set number of rubbing cycles, and it tells you whether the dye comes off. It is the number that decides whether a leather jacket or bag leaves colour on a white shirt.

Ask for the grade in writing, wet and dry, against the number of cycles used. If no one quotes it, no one tested it. A higher grade means less colour transfer, and the target belongs in the tech pack next to the tannage, because a well tanned leather that marks a customer's clothes is likely to come back as a return.

What a leather line in the tech pack should say

Four lines, and most tech packs carry none of them:

  • The layer: full grain, top grain or split.
  • The tannage: vegetable, chrome or combination.
  • Rub fastness: the grade, wet and dry, with the number of cycles.
  • The tannery: by name.

A wet white cloth rubbed on the surface is a quick first check of your own, described in four checks to run on fabric before you accept it. To have the leather written into the specification properly, start with a free tech pack.

Keep reading

Ask us about yours.

Tell us what you want made and we will tell you what it takes before you commit to anything. The quote is free.