Fabric

What ripstop fabric is, and how to specify it

· 3 min read

Ripstop is a woven fabric with a grid of thicker threads that stops a tear at the next line so a snag stays a small hole, and a tech pack should name it as ripstop with its fibre and weight.

On this page
  1. What is ripstop fabric?
  2. How does ripstop stop a tear?
  3. Where did ripstop come from?
  4. Is ripstop only made in nylon?
  5. What does ripstop not do?
  6. How can I check that a fabric is really ripstop?

What is ripstop fabric?

Ripstop is a woven fabric with a grid of thicker threads woven into it. Look closely at a pair of army trousers and the grid shows as small squares across the cloth.

Between the thicker threads the fabric is an ordinary weave. The grid is what makes it ripstop: at intervals, a heavier thread runs through the cloth in both directions, so the fabric is reinforced along lines that form a square pattern. From a distance it reads as a plain fabric with a faint texture. Up close, the grid is unmistakable.

How does ripstop stop a tear?

When a tear starts, it runs until it hits the next thick thread, and stops there. So a snag stays a small hole instead of ripping down the leg.

In an ordinary woven fabric, a tear travels because each thread that breaks passes the load on to its neighbour, and that one breaks too. The thicker threads of the grid are harder to break, so the tear reaches one and stalls. The damage stays inside a square, or a few of them, rather than opening along the whole panel.

That is the entire job of the grid, and it is a useful one. A garment with a small hole can be worn and repaired. A garment with a tear running down the leg is usually beyond saving.

Where did ripstop come from?

It was developed in the Second World War to replace silk in parachutes, and army combat uniforms are still made from it today. US Army combat uniforms use a 50/50 nylon-cotton ripstop.

The history explains its reputation: a fabric chosen for situations where a snag must not become a failure. It also explains the look. The grid reads as military and utility clothing, and that association is part of its appeal on a fashion cargo.

Is ripstop only made in nylon?

No. Cotton and poly-cotton ripstop exist too, and that is what most fashion cargos and workwear use. Ripstop is a construction, not a fibre, so the same grid can be woven in different fibres.

VersionWhere it is used
Cotton ripstopFashion cargos, workwear
Poly-cotton ripstopFashion cargos, workwear
Nylon-cotton, 50/50US Army combat uniforms
Nylon ripstopThe version most people picture when they hear the word

For a brand making cargo trousers, cotton ripstop is the natural starting point to ask a mill for. It gives the grid and the look in a fibre that suits a trouser. The fibre choice still carries its own decisions about handle, weight and care, exactly as it would for a plain cotton.

What does ripstop not do?

It stops a tear spreading. It does not stop the first hole, and it will not make a thin fabric strong.

This matters for how a garment is described and for how its fabric is chosen. A lightweight ripstop is still a lightweight fabric. The grid limits how far damage travels, but the cloth between the thicker threads is no stronger for being there. If a garment needs to stand up to abrasion or heavy wear, that is a question of fibre, weight and construction, and ripstop is an addition to those decisions, not a replacement for them.

It also matters for product copy. "Ripstop" is a fair claim about tear spread. It is not a claim that the garment cannot be damaged, and a description that implies so invites the complaint it cannot answer.

How can I check that a fabric is really ripstop?

Look closely for the grid. A plain weave can look similar from a distance, so the check is close up, against the approved swatch, on the bulk fabric when it arrives.

This is why the name matters in the specification. If the tech pack says "cotton, khaki" or "cargo fabric", a plain weave that looks similar at arm's length is a reasonable reading of the brief, and the factory would not be wrong to use one. If it says ripstop, the grid is part of the specification, and a fabric without it does not meet it.

Check the weight as well as the grid. A ripstop that arrives lighter than the approved swatch has the right look and less of the fabric you paid for.

How to write ripstop into the tech pack

  • Name it: ripstop, by name, not "cargo fabric" or a colour.
  • Give the fibre: cotton, poly-cotton, nylon-cotton or nylon.
  • Give the weight, so a lighter cloth with the same grid cannot be swapped in.
  • Reference the approved swatch, and check the bulk against it for the grid and the weight.
  • Describe it honestly: it stops a tear spreading, not every tear starting.

The weight check is one of the four checks to run on fabric before you accept it. To get the fabric named properly from the first draft, start with a free tech pack.

Keep reading

Ask us about yours.

Tell us what you want made and we will tell you what it takes before you commit to anything. The quote is free.