Garment history

What selvedge denim is, and why it costs more to make

· 4 min read

Selvedge is the finished edge of denim woven on a shuttle loom about 80 cm wide, and laying a pair of jeans with the outseams on that edge takes about 2.2 m of fabric, against 1.35 m on a 150 cm roll.

On this page
  1. What is the red line on selvedge jeans?
  2. Why did denim mills stop using shuttle looms?
  3. How did Japan bring selvedge denim back?
  4. How much more fabric does a selvedge pair use?
  5. Why can one selvedge jean cost 60 dollars and another 345 euros?
  6. How can you tell real selvedge from a sewn-on line?

What is the red line on selvedge jeans?

It is the edge of the fabric. Selvedge denim is woven on a shuttle loom, which produces a narrow roll with a finished edge, and that edge, often marked with a coloured thread, is the line you see when a pair of jeans is cuffed.

To make the line show, the pattern pieces are laid with the outseams on the edge of the roll, so the selvedge runs down the outside of each leg. That placement turns a technical edge into a visible detail. It is also what makes the fabric expensive to use, for reasons that come down to the width of the roll.

On a shuttle loom the weft thread is carried across the warp and back, so it turns at each side and the edge closes on itself. A modern loom inserts the weft across a much wider width and the edge has to be finished separately. The difference in the edge is the difference in the machine.

Why did denim mills stop using shuttle looms?

Because the world wanted more denim than shuttle looms could weave. In the sixties, mills replaced them with projectile and air-jet looms that ran about five times faster and wove about twice as wide.

The history runs back to the start of jeans. 1873 is the year Levi Strauss and Jacob Davis patented the riveted work trouser, and the denim of that era came off shuttle looms. For close to a century after that, jeans were made from shuttle-loom denim. Demand eventually outgrew the machines.

Shuttle loomProjectile or air-jet loom
Width wovenAbout 80 cmAbout 150 cm
SpeedSlowAbout five times faster
EdgeSelvedge, closed by the weftFinished separately
In denimFrom the start of jeans to the sixties; revived in the eightiesFrom the sixties

A loom that weaves twice the width at five times the speed is not a marginal improvement. It changes what a metre of denim costs to make, and it made shuttle looms uneconomic for most mills.

How did Japan bring selvedge denim back?

American soldiers had left their jeans behind in Japan after the war, and Japan fell hard for them. In the eighties, Japanese mills brought the old shuttle looms back, set on beating the original denim, and they succeeded.

The Okayama mills' selvedge programmes date from the 1970s and 1980s, and much of the selvedge most respected today is woven there. Japanese selvedge became the denim others are measured against. That reputation is part of what a brand buys when it specifies selvedge.

How much more fabric does a selvedge pair use?

About 2.2 m on the narrow roll against 1.35 m on the wide one, for the same pair, laid with the outseams on the selvedge. That is nearly a metre more denim per pair, before the slower loom is priced in.

These are working numbers from laying one pair of jeans on both widths, not a quotation for any specific pattern.

Narrow roll (selvedge)Wide roll
Roll widthAbout 80 cmAbout 150 cm
Fabric per pairAbout 2.2 mAbout 1.35 m
DifferenceAbout 0.85 m more

The reason is the same one that governs any marker: fabric is bought by length off a roll of fixed width, and what matters is how much fits across it. On a wide roll, pieces can be nested side by side. On a narrow roll with the outseams fixed to the edge, the leg pieces have to run down the length, and far less fits across.

The mill prices denim by the metre, so the extra 0.85 m is paid for in full on every pair. And because a shuttle loom runs at about a fifth of the speed of a modern one, each of those metres also costs more to weave. To see what the line costs you, multiply the difference in consumption by the price per metre the mill quotes.

Why can one selvedge jean cost 60 dollars and another 345 euros?

Because the line does not set the price on its own. Both are selvedge: in September 2026, Uniqlo's US site listed a selvedge slim straight jean at 59.90 dollars, and Iron Heart's IH-634S, a 21 oz selvedge, showed at 345 euros.

The line tells you how the fabric was woven. It does not tell you which mill wove it, how heavy it is, how the jeans were made or what the brand charges for its name. The selvedge sets a floor under the fabric cost, because of the width and the loom. Everything above that floor comes from the rest of the specification and the business selling it.

How can you tell real selvedge from a sewn-on line?

Ask the mill for the loom, not the line. Since selvedge became popular, a lot of wide-loom denim has been sold with a red ID sewn on afterwards, so a red line on its own proves nothing.

On real selvedge the line is part of the woven edge of the fabric. A sewn-on strip is a separate piece stitched along an edge that was cut or finished another way. For a brand buying fabric, the check is in the paperwork and on the roll: the mill's name, the loom type in writing, a roll width of about 80 cm rather than about 150, and the edge itself, inspected on the roll before cutting.

What to ask for when you specify selvedge

  • The mill and the loom: the mill by name, and shuttle loom stated in writing.
  • The roll width, and the consumption per pair on that width with the outseams on the selvedge.
  • The cost per pair, not per metre: nearly a metre of extra denim per pair is the line's real cost.
  • The edge on the delivered roll, checked before cutting.
  • Whether your customer will see it: the line shows when the jeans are cuffed, so the design should give them a reason to cuff.

The step change between roll widths is explained in why pattern width decides what a garment costs. To get the mill, the loom and the layout written into the specification, start with a free tech pack.

Keep reading

Ask us about yours.

Tell us what you want made and we will tell you what it takes before you commit to anything. The quote is free.