Garment history

Why jeans have copper rivets on the pockets

· 3 min read

Jeans have rivets because the tailor Jacob Davis hammered horse-blanket rivets into the pocket corners of work trousers that kept tearing there, and he and Levi Strauss & Co. were granted a patent for it on 20 May 1873.

On this page
  1. Why do jeans have rivets?
  2. Who put the first rivets on trousers?
  3. Why did Davis need Levi Strauss?
  4. What does the 1873 patent cover?
  5. Were the first riveted trousers made of denim?
  6. What does a rivet do that stitching does not?

Why do jeans have rivets?

Because work trousers kept tearing at the pocket corners, and a tailor fixed them with metal. The copper studs on jeans began as a repair to a specific failure, not as decoration.

The pocket corners are where everything gets yanked: hands going in, tools going in, the weight of whatever is carried pulling down on the opening. On hard-wearing work trousers in the 1870s, that is where the seams gave out. Rivets put a metal fastening through the layers at exactly those points, and they held.

The rivets on a pair of jeans today sit in the same place for the same reason: at the ends of each front pocket opening, where the strain is.

Who put the first rivets on trousers?

Jacob Davis, a tailor in Reno, Nevada. According to Levi Strauss & Co.'s own account, a labourer's wife asked him around 1870 to 1871 for work trousers that would not fall apart.

Davis took the copper rivets he used on horse blankets and hammered them into the pocket corners, and also into the base of the fly. The National Archives account of his later deposition dates the first riveted trousers to January 1871 and places horse-blanket rivets on his table.

The idea did not come from clothing at all. It came from another product on the same workbench that had the same problem, a strap under load, and an existing fix.

Why did Davis need Levi Strauss?

Because he wanted a patent and could not afford the fee to file one. So he wrote to the man who sold him his cloth, Levi Strauss, and proposed taking it out together.

Strauss was the supplier, not the inventor. What he brought was the means to file, and a business that went on to make the trousers. The partnership turned a workshop repair into a product.

What does the 1873 patent cover?

The patent is No. 139,121, titled "Improvement in Fastening Pocket-Openings", granted on 20 May 1873 to Jacob Davis and Levi Strauss & Co.

The title is precise about what was new. It was not a new garment, a new fabric or a new cut. It was a way of fastening the openings of pockets so they would not tear. Davis went on to run production for the company in San Francisco.

FactDetail
InventorJacob Davis, tailor, Reno, Nevada
First riveted trousersJanuary 1871, per the National Archives account
Where the rivets wentPocket corners and the base of the fly
Where the rivets came fromHorse blankets
PatentNo. 139,121, "Improvement in Fastening Pocket-Openings"
Granted20 May 1873, to Jacob Davis and Levi Strauss & Co.

Were the first riveted trousers made of denim?

No. Davis's first riveted trousers were made of cotton duck, a heavy canvas. Levi Strauss & Co. went on to make them in both duck and blue denim.

That is why the story is usually told with Strauss as the man who sold Davis his cloth, not his denim. The rivet came first and the fabric followed. Over time the blue denim version became the one people remember, and rivets have been on jeans as a category ever since, though not on every pair.

Which makes the most famous detail in denim a repair. It is now part of what jeans look like, but it began as an answer to one tear in one place.

What does a rivet do that stitching does not?

It concentrates a fastening through all the layers at a single point. A seam spreads the load along a line of thread; at the very end of an opening, that line stops, and the end is where it starts to tear.

A metal rivet pinned through at that point gives the load something rigid to pull against. Stitched reinforcements such as bar tacks address the same stress point with thread instead of metal. Which one a garment uses is a decision about the fabric, the load and the look.

For a brand, rivets are a trim like buttons or zips, and they need specifying as one. They come in different metals and finishes, they have to suit the weight of the fabric they are set into, and their placement is a construction detail, not something to leave to whoever sets them.

What a rivet means for your own design

Two things carry over from the story to any garment you make.

A detail with a reason is easier to keep. The rivet survived because it solved a real failure at a real stress point. When you add hardware or reinforcement, know which point it protects and say so in the specification.

Specify trims as carefully as fabric. For rivets, that means the metal and finish, the placement on each pocket, and confirmation that the fabric weight suits them. Ask the factory to show the reinforcement on the sample.

If you are planning a garment with hardware like this, start with a free tech pack, and see what to ask a clothing manufacturer before you choose one.

Keep reading

Ask us about yours.

Tell us what you want made and we will tell you what it takes before you commit to anything. The quote is free.