Why a football shirt's pattern does not crack, and a merch print does
· 4 min read
The pattern on a polyester football shirt is ink turned to gas and absorbed into the fibre, so there is no surface layer to crack, while a print on a cotton tee is a layer of ink that cracks when it is stretched or washed hot, especially if it was not cured long enough.
On this page
Why does the pattern on a football shirt not crack?
Because it is not printed on the fabric. It is in it. The ink is heated until it turns to gas and soaks into the polyester fibre, and when the fibre cools it closes around the colour.
There is no layer on top of the cloth, so there is nothing to crack. The colour bends, stretches and washes with the fibre because it is part of the fibre. The process is called sublimation, and it is the reason a shirt with a complex all-over pattern can be stretched and washed without the pattern breaking up.
That applies to the dyed-in pattern only. The other decoration on the same shirt is a different matter, covered below.
Why does a print on a cotton merch tee crack?
Because it is a layer of ink sitting on the cotton, not colour inside the fibre. Stretch the fabric, wash it hot, and that layer breaks.
A knitted cotton tee stretches every time it is pulled over a head. The ink film on top has to stretch with it. If the ink is flexible enough and properly cured, it does. If it is not, it forms fine cracks, first where the fabric moves most, and the cracks widen with each wash until the print looks old in the wrong way.
The weak point is often not the ink itself but the way it was cured. A print has to be heated for long enough, at the right temperature, to set fully. A print that was not heated long enough looks fine on day one and cracks in the wash. Nothing about it on delivery tells you it is under-cured.
Can you sublimate a cotton t-shirt?
Not in the way a football shirt is made. Sublimation works on polyester, because the gas is absorbed into the polyester fibre as it is heated and held there as the fibre cools. Cotton does not take the colour that way.
| Sublimation | Print on cotton | Heat-pressed decoration | |
|---|---|---|---|
| Fabric | Polyester | Cotton | Either |
| Where the colour sits | Inside the fibre | A layer on the surface | A separate layer pressed on |
| Can it crack | The pattern itself, no | Yes, if stretched, washed hot or under-cured | Yes, it can crack and peel |
| What decides durability | Mostly the fabric | Ink choice and curing | Material and application |
So on a cotton tee the print is a layer, whichever method is used, and how long it lasts comes down to your printer. That is not a reason to avoid printing on cotton. It is a reason to ask the right questions before the run.
Sublimation also has its own limit worth knowing: the dye is transparent, so it works on white or light polyester and cannot put a light colour onto a dark base.
Which parts of a football shirt can still crack?
The crest, the sponsor, the name and the number. These are heat-pressed on top of the fabric rather than dyed into it, so they can crack and peel like any other surface layer. Some badges are embroidered instead.
This is worth understanding if you are making a team or club product, because buyers often assume the whole shirt behaves like the pattern. It does not. The dyed-in background will outlast the pressed-on details, and the details are the part people look at first. Treat each decoration on a garment as its own specification, with its own test.
How do you stop a cotton print from cracking?
Ask three things before you sign off the run: what temperature and time the printer cures at, whether they will wash-test a sample shirt, and whether the ink suits the fabric.
What should the printer tell you about curing?
The temperature and the time, stated as numbers, for the ink and the fabric on your order. A printer who answers with a figure is controlling the step that decides whether the print survives. A printer who answers with a general reassurance may be right, but you cannot check it.
Why wash-test a sample shirt?
Because under-curing does not show until the print has been washed. Printing a sample on the production fabric, washing it several times the way a customer would, then stretching the print and looking closely, is the cheapest way to find out how the run will behave in a few months. A print that has not been washed has not been tested.
Does the ink have to match the fabric?
Yes. A stretchy fabric needs a stretch ink. If the fabric moves more than the ink can, the ink loses, however well it was cured. A heavy, stable jersey and a light, stretchy one are different jobs, and the printer should choose the ink for the fabric, not use one ink for everything.
What to ask your printer before the run
Put the answers in writing, alongside the artwork:
- The decoration method for each element of the design: printed, heat-pressed or embroidered.
- The ink type, and confirmation that it suits the stretch of your fabric.
- The cure temperature and time.
- A wash-tested sample on the production fabric, kept as the reference for the run.
- If the garment is polyester and the pattern covers the whole surface, whether sublimation is an option for the pattern, and which elements will still be pressed on top.
For how sampling is quoted and approved before production, read clothing samples: cost, timing and approval. To specify the print, ink and placement properly from the start, start with a free tech pack.